fbpx

When it comes to the maintenance of the car, many car owners think of the engine and the tires, and the small Wheel hub let us completely ignore it, but we need to know whether the quality of the Wheel hub is related to the quality of the car tires, which is related to our life safety. So, the small Wheel hub are also in need of our maintenance, so if we have damage due to improper maintenance of the wheel, how do we fix it?

Precautions for daily maintenance of the hub:

1. When the temperature of the hub is high, it should be cleaned naturally and then cleaned. Never use cold water to clean it; otherwise, the aluminum alloy Wheel hub hub will be damaged, and even the brake disc will be deformed and affect the braking effect. In addition, cleaning the aluminum platform gold hub with a cleaning agent at high temperatures will cause a chemical reaction on the surface of the hub, which will lose its luster and affect the appearance.

2. When the Wheel hub is covered with hard-to-clear tar, if the general cleaning agent does not help, try to remove it with a brush, but do not use a hard brush, especially an iron brush, to avoid damage to the hub surface.

Minor scratches can be repaired by themselves:

The first step: clean the wheel hub. We can use paint dilutions to wipe around the scars and remove dirt. It is difficult to remove the dirt from the deepest part of the scratch, and you can use a toothpick to clean it thoroughly. When cleaning, in order to prevent accidental application of paint to the unrelated parts, it is best to carefully stick the adhesive tape around the scar.

Step 2: The owner arranges the tip of the brush and applies the lacquer to the damaged area of the wheel. After the lacquer is dried, it is slightly convex and easy to be observed by the owner.

Step 3: After the car is completely dried, the paint is applied with soapy water on a water-resistant paper to smooth the surface. Then use a mixture to wipe out the light and finally wax.

Step 4: If the owner finds a deep scar on the wheel hub, and must observe whether the metal surface is exposed, if the metal surface is not visible, it will not rust. You can concentrate on the finishing paint. Use a pen tip to pick up the spot and wait until the paint is completely dry. If you find metal exposed, it is best to replace it.