Brake & Clutch Fluid, 480 ml
- Capacity: 480 ml
- Item Number: C1-36
- QTY/CTN: 24 PCS
- Color: Colorless
- State: Liquid Additive
- Application: brake fluid reservoir
- Size: D62H196mm (D: diameter, H: height)
Brake & Clutch Fluid
Features
- High heat stability.
- Protects metal brake system parts from corrosion, both ferrous and non-ferrous.
- Gently swells rubber seals to enhance sealing & prevent system leaks.
- Lubricates moving parts to prolong service life.
- Good low-temperature performance.
- Flows smoothly in hot or cold conditions.
Application
- Remove the old, dirty fluid from the master cylinder reservoir.
- Use a lint-free cloth to wipe out the reservoir.
- Pour new brake fluid into the reservoir just until it reaches the “Full” line, replace the cap on the reservoir.
Attention
- Keep out of reach of children.
- Don’t mix with water or mineral oil.
- Store brake fluid only its original container and tighten the container cap if there is remaining brake fluid.
- Replace the brake fluid once a year.
- Don’t spill the brake fluid over paint coat of the car
| Brand Name | THIS |
|---|---|
| Model Number | C1-36 |
| Weight | 480ml |
| Use | brake oil |
| Carton Size | 421*282*195mm |
| G.W./CTN | 12.83kg |
| N.W./CTN | 12.37kg |
| Can | Tinplate Bottle |
| Suitable | car/motor |
| Service | OEM/ODM |
| Boiling point(we | 140 degree |
| Boiling point(dry) | 205 degree |
Questions and Answers
Over time, brake fluid deteriorates in use because it absorbs moisture from the atmosphere. The excessive amount of moisture absorbed will boil the fluid at lower temperature due to heat generated during frequent braking action. This can also cause vapour lock, which affects your braking system. It also makes the fluid less reliable in hard braking efficiency and emergency conditions. THIS Brake Fluid prevents this from happening because of its high boiling point.
2.HOW OFTEN SHOULD I CHANGE MY BRAKE FLUID?
If you check the owner’s manual of the year 2000 and up model vehicles, you’ll find that car makers are recommending brake fluid changes every 24 to 36 months or every 40,000 kilometres drive. However, technical experts recommend to top-up regularly and change the brake fluid (flush and fill) once a year after completing the warranty period.
3.HOW DOES IT WORK?
Brake fluid which has absorbed excessive amounts of moisture will boil at lower temperatures due to the heat generated during the braking action. As brakes work on friction and friction causes heat, the vapour that comes out from this heat will eventually make your brakes feel “spongy.” When this happens, you will have what you call a “vapour lock” brake failure due to vapour formation.
Brake fluid moisture also corrodes precise metal hydraulic components such as valves and pistons which cause them to stick. Eventually, this will create rust inside your system that will clog its vital valves and ports.
